Knitting Baby Stuff: Rainbows & RainDROPS

I’ve had my eye on this pattern for a while after spotting this gorgeous version by kcol on Ravelry. So when a close friend revealed the gender of her baby due this month, I reallocated my gorgeous balls of Knit Picks Chroma in Groovy and instead of making the socks I bought them for, I set about for to recreating kcol’s version of the DROPS b14-27 Jacket.

IMG_9122


The finished product.

I knew from the project notes on Ravelry that this would knit up larger than expected, so I cast on the 6-9 month size in the hope it will fit well for next winter when bub is nearly one year old.

IMG_9123


The gradient of the Knit Picks Chroma works brilliantly for these skinny stripes.

Pattern: b14-27 Jacket by DROPS design

Source: Garnstudio DROPS Design

Price: Free!

Yarn: Knit Picks Chroma Fingering in Groovy & Cascade Yarns Heritage in White

Needle: 3.25mm circulars

This is a very clever pattern which uses short rows to create a flared cardigan knit side-to-side with cast on and cast off to create sleeves. Essentially only two seams should be required. Except knit as written, one must change yarn every 2 rows! So the benefit having only two sleeve seams is overwhelmingly negated by the need to sew in eleventy-million ends. Having cast on and knit a few colour changes, I quickly recognised this issue and in addition to dreading the end weaving, I wondered whether I’d be able to make the finished product look neat and tidy. My end weaving skills are still a work in progress.

Screen Shot 2016-08-17 at 2.01.07 PM


It quickly became apparent that the clever two-seam construction was going to become completely irrelevant with eleventy-million ends to weave in.

Modification required!

By adding a white border along the bottom, I would be able to carry the yarn for the stripes and avoid the eleventy-million ends all together. Genius!

So, I frogged and cast on again adding a 6 stitch white border to the bottom edge. I quickly refreshed my memory of how to do an intarsia colour change by watching this video and got stuck in.

However, I soon realised that the neat intarsia method I was using was designed only for stocking stitch. I improvised for the wrong side knit row of this garter stitch pattern, but after a few stripes it was clear my improvisation was giving lacklustre results! Further Google searching brought me to this video and —after yet another frogging—I started again. It looked much better!

Once I was (finally) on my way, this knit up reasonably quickly and despite the rows and rows of garter stitch, the short row turns and the gradient colour changes of the Chroma yarn kept it interesting and fun.

The only other small modification I made was to slip the first stitch of every row purlwise to give a neat edge. A trick I learned from Kelly Brooker‘s newborn patterns.

Screen Shot 2016-08-17 at 2.01.46 PM

Who knew garter stitch could be so fun?

As the Ravelry project page suggested, this is a HUGE cardigan. I suspect that maybe the error is in the given gauge. It certainly seemed way off! The pattern recommends 2.5mm needles. I (rather amazingly) didn’t have any in my seemingly endless needle collection, so I swatched on 2.75mm using the Chroma. My swatch was under size by more than 20%! So I reswatched on 3.5mm. This gave me the right gauge, but the fabric looked looser than I’d like. I compromised and knit my cardigan on 3.25mm needles. Despite being well under given gauge, the resulting cardigan is enormous. It looks more suited to a 2 – 3 year old than a 6 – 9 month old!! Next time, I might knit up on 2.5mm needles just to see what happens.

IMG_9125

The wrong side can be just as beautiful as the right side when you have no ends to weave!

So whether it’s this winter—or more likely the next!—that this cardigan fits, I’m hoping it gets lots of wear. I’m wrapping up these Rainbows & RainDROPS to send to a little girl who made a safe and happy entrance to this crazy world just last week!

 

Knitting Baby Stuff: A Beanie for Bugsy

I have been so busy knitting things for newly arrived bairns, that my own gorgeous not-so wee one didn’t have a single hand knit item in his current wardrobe. Feeling—albeit a little irrationally—guilty about this, I dug out my stash to find something I could quickly turn into a warm winter beanie as the cold weather finally set in.

Screen Shot 2016-06-23 at 8.01.06 PM.png

Katia Montezuma in #105. An impulse buy from House of Yarn.

I found this gorgeous impulse buy from House of Yarn, measured W’s seriously large head, and cast on.

This is a very quick knit, but I still managed to pick up some new skills along the way. I had never come across a provisional cast-on before. This is a nifty technique for keeping your cast-on stitches ‘live’ so you can come back and knit onto the other side of them later. A quick YouTube got me up to scratch. I watched this and this to figure it out. In this pattern it is used to allow a kitchener stitch grafting rather than a seam to complete the beanie tube.

I have to look up kitchener stitch every single time! Knit, slip, purl, purl, slip, knit.

I knit this up within a day and had just enough yarn left over to make two delicious tassels. I worked out how to do that by watching the video here.

Screen Shot 2016-06-23 at 7.26.20 PM

Getting my provisional cast-on on.

 

IMG_8855.jpg

His urge to take the beanie off matched only by my wish for him to keep it on.

Pattern: Pea Green Beanie by Michelle Dupont

Source: Twoandsix blog (found via Ravelry)

Price: Free!!

Yarn: Katia Montezuma in colourway #105

Needles: 7.5mm

So, it turns out toddlers can sense your level of enthusiasm—even when you try very hard to act neutral—for them to love something and respond by immediately generating an equal measure of dislike! It took more than a month of offering this beanie before it was finally voluntarily donned! I should have known this given the number of times the nemesis dressing gown has been worn! But, I managed to finally get it on his head for some photos yesterday. Super cute, super warm. Even if it spends much of its life in a cupboard.

Knitting Baby Stuff: From Frogs Legs to Loopy Leggings

I’m back!

There’s been a lengthy silence on this blog due to many factors—mostly the arrival of a gorgeous B at the beginning of April—but I’ve never stopped knitting! So we have some catching up to do.

File 9-04-2016 11 49 49 am

Master B. joined our family in April.

These scrumptious leggings were finished before B. arrived, but the weather is only just starting to cool down now and we finally got them on to W for a few photos this morning.

IMG_8695

Loopy Leggings modelled by W. highlighting the self-striping rookie error of the leg rejoin.

They didn’t start out so fabulous. Yet again, I failed to swatch (who has time, right?) and then I failed to convert US needle sizes correctly, so used a 6mm needle instead of a 5mm needle for the main knitting. I also failed to measure my child and guessed at a size.

By the time I reached the gusset, I realised I had knit a ginormous pair of pantaloons that could have just about fit me!!

Frogged. Whole process taking far, far longer than it would have to (a) swatch and (b) measure my intended wearer.

So, armed with a needle conversion chart printed and popped into my knitting organiser for future reference, and my measurements, I cast on again. This time, a gauge swatch!

After sorting out my gauge, I got on with it and turned out this lovely pair of leggings. Only hitch being that the yarn is a little scratchy on delicate toddler skin. A thin pair of cotton leggings underneath sorted that out and he’s played happily in them all morning.

Pattern: Lamby Leggings by Sarah Lehto

Source: Ravelry (of course!)

Price: $6 USD

Yarn: Plymouth Yarn Pasea in 1017 (self-striping in red, orange & yellow)

Needle: Would you know after all that I didn’t write it down? Can’t remember what I ended up using! But you’ll be doing your own gauge swatch, right?

IMG_8691

Designed with plenty of room for W’s cloth nappied bottom. They might sag a little sadly over a a slimline disposable.

The pattern is very well written, including photographs to help with some of the less common techniques, such as the double bum short rows. I still struggled a little with getting this to work, but I think that is more my issue than the author’s!

I did spot a few errors—the most costly of which was the instruction in the gusset to ‘repeat gusset increase round 7 times’. This should read ‘repeat gusset increase a total of 7 times’. I repeated it 7 times (after I’d done it the first time, making a total of 8 times) and ended up with 4 more stitches than I should have. Tink tink.

I also ran into issues when I used a knit front & back (KFKB) technique for my increases in the increase round immediately below the waistband. I failed to subtract the stitch I used for the KFKB from the stitch count between the increases, and ran out of stitches prior to the end of the round. Again, my issue rather than the author’s! If I’d used a ‘make one’ technique of picking up the loop between stitches—as implied by the instructions—all would have been fine!

IMG_8703

I knit them a bit long to allow for upcoming growth spurts. The cuff looks cute folded up in the meantime.

My other main failing was due to a lack of finesse in using a self-striping yarn. I should have rejoined for the legs ensuring that the rejoin was the same colour on both legs and ideally the same as the colour joining them on the gusset. I didn’t do either of these things, so there’s a small odd stripe on one thigh and a huge thick stripe on the other. And the legs are not the same. But, hey, they are loopy leggings!